4 mm Pellet Press Die Set Vacuum Die Sets These Micro Load Cells are

These Micro Load Cells are particularly useful for small pellet press die sets

1% F*S means that the error or variation in the load cell's measurements under compression is between 0

tip-resistant bottom

Weigh up to 320 g with mg (milligram  0

22 mm (~1 inch) pellet die sets are some of the most common sizes found around the lab

4 mm Pellet Press Die Set Vacuum Die Sets These Micro Load Cells arePellet Die set for making 4 mm (~0. 16 inch) pellets from powders. At such small diameters, you need such a small force (around 100 lb!) for very high stresses on the powder. We do not suggest using with a hydraulic press which does not have an accurate read out for low forces. Do not use this die with a big, heavy press you can easily exceed the yield stress of the steel. You can even push down hard with your hand or tap it with a mallet to create